Speed when it matters. Precision all the time.
CNC Milling Service
Launch faster with precise, production-ready milled parts. KaiSpeed runs 3-, 4-, and 5-axis CNC milling for prototypes, bridge builds, and series production—combining engineer-led DFM, stable processes, and reliable inspection.
- Multi-axis capacity: 3/4/5-axis milling
- Tolerances as low as ±0.0002″ (0.005mm)
- Lead times as fast as 3–7 days
All uploads are secure and confidential
CNC Milling Service
Delivered with speed and precision
3-Axis CNC Milling
Efficient and accurate for prismatic parts and planar features; best value for simple-to-moderate geometry.
Typical use: baseplates, brackets, housings, jigs/fixtures, cover plates.
4-Axis CNC Milling
Rotary indexing enables multi-face features in fewer setups—great for parts with features around the circumference.
Typical use: impellers, manifolds, cams, complex brackets.
5-Axis CNC Milling
Simultaneous or indexed machining for complex surfaces and compound angles; fewer setups, better feature-to-feature accuracy, and improved surface quality.
Typical use: aerospace/robotics components, medical instrument frames, high-value housings, molds/dies and contours.
Why KaiSpeed
- Engineer-led DFM: Early manufacturability feedback to protect tolerance stack-ups, surface quality, and cost.
High complexity, high mix: Thin-walls, deep pockets, micro-features, compound angles—done right.
Quality you can prove: FAIR, in-process checks, CMM reports, material certs (on request).
Secure & responsive: NDA welcome, transparent comms, proactive risk mitigation.
Scalable supply: From one-offs to steady production with consistent process controls.
24/7 Support • Fast Global Delivery • Secure NDA Protection
How to Work With Us
01. Upload Your CAD
Choose your process (CNC, sheet metal, injection molding, 3D printing, etc.) and upload your files.
NDA-backed confidentiality
Secure transfer (STEP/IGES/ PDF)
02. Get Quote & DFM
Select material, finish, and quantity. Receive a clear quote plus DFM feedback to optimize cost, lead time, and quality.
Typical within 24 hours
Alternative process/ material options when helpful
03. We Start Production
Once approved, we begin manufacturing to your drawing and GD&T requirements.
In-process QC and FAI on request
Photo updates and milestone reports
04. Receive Your Parts
After final inspection, we pack and ship to your door.
Dimensional/CMM reports available
Global shipping (NA/EU often 3–10 days)
CNC Milling Materials & Surface Finish
Materials
We provide a wide range of materials, including metals, plastics, and composites.
Surface Finishes
We offer superior surface finishes that enhance part durability and aesthetics for applications requiring smooth or textured surfaces.
Our Custom CNC Milling Capabilities
| Parameter | Specification |
|---|---|
|
Part Size |
2000 mm x 1500 mm x 300 mm |
|
Minimum Wall Thickness |
0.8 mm (metals), 1.5 mm (plastics) |
|
Linear Tolerances |
±0.0002” (0.005 mm) |
|
Minimum Feature Size |
0.5 mm or Ø 0.50 mm |
|
Minimum Cutting Depth |
0.3 mm |
|
As Machined Finish |
Ra 125 or better |
|
Complex Features |
Curved surfaces, undercuts, deep cavities, grooves, complex contours, asymmetrical features, etc. |
Specialist Industries
CNC Milling Case
FAQs
We run 3-axis, 4-axis, and 5-axis CNC milling to match different geometry, cost, and lead-time needs.
3-axis: Best value for prismatic parts and planar features.
4-axis: Adds rotary indexing for multi-face features in fewer setups (great for parts with features around a circumference).
5-axis (indexed & simultaneous): For complex surfaces, compound angles, and tight feature-to-feature relationships—fewer setups, better accuracy.
We support prototypes, bridge builds, and production with multi-axis milling, DFM, and inspection.
Typical envelopes (guide): up to ~1270 × 508 × 635 mm (3-axis) and ~450 × 700 × 400 mm or Ø400 mm rotary (5-axis). If your part is larger, we’ll evaluate sectional machining or partner capacity.
Tolerances (guide): general features ±0.127 mm (±0.005″); ±0.05 mm (±0.002″) is common on suitable features with a full drawing & inspection plan. Tighter specs can be reviewed case-by-case.
Lead times: simple 3-axis prototypes often 3–7 days; complex 5-axis with finishing 7–14 days (depends on geometry/finish).
Extras: finishing (anodize, EN, passivation, powder coat, etc.), heat treatment, CMM reports, material certs, CoC, RoHS/REACH.
Milling: the tool moves (X/Y/Z, possibly A/B/C), the part is typically fixed; ideal for flats, pockets, slots, contours, and multi-face features.
Turning: the part rotates while the tool is stationary (or moves linearly); ideal for round parts—shafts, bushings, rings, threaded features—often faster and more economical for cylindrical geometry.
Vertical mills (VMC): vertically oriented spindle; versatile, great visibility, ideal for most precision work and smaller components.
Horizontal mills (HMC): horizontally oriented spindle; better chip evacuation, rigidity, and material-removal rates—suited for large/heavy parts or high-volume roughing.
Choose HMC for bulk removal & heavy fixtures; choose VMC for intricate, detailed work and fast setup.
5-axis machines move in X/Y/Z plus two rotary axes (A/B or A/C). Indexed or simultaneous control lets the tool reach complex surfaces and angles, reducing setups, error stack-ups, and surface mismatch—ideal for aerospace/robotics/medical parts and premium housings.
Tool offsets compensate for the actual tool length and diameter so paths are cut where the program intends. Accurate offsets (often via probing) keep features on-spec and consistent across tool changes and batches.
Metals: Aluminum (6061-T6/6063/6082/7075-T6), Stainless (303/304/316/17-4PH), Carbon/Alloy steels (1018/1045/4140), Brass (C360), Copper (C110/C101), Titanium (Gr2/Gr5), Magnesium (AZ31B).
Plastics: ABS, PC, PMMA (Acrylic), POM/Delrin, PA6/66, PEEK, PTFE, PP, HDPE, FR-4.
Need help choosing? Share your environment, loads, and finish requirements—we’ll recommend the best option.